An irreversible compression ground grid cross connector. Use on 6 connectors and 4 dies to install all combinations from #6 solid to 500 kcmil. UL Listed for Class I lightning protection systems.
| Catalog Number | Burndy Cross Reference | Cable to Cable | Cable to Ground | To Rebar | ||
|---|---|---|---|---|---|---|
| Element A | Element B | Element A | Element B | Element A | ||
| C6411 | YGL2C2 | #6 Sol. — #2 Str. (.292) |
#6 Sol. (.162) — #2 Str. (.292) |
|||
| C6412 | YGL29C2 | #1 Str. — 250 kcmil. (.575) |
1/2″–5/8″ Rod | #6 Sol. — #2 Str. (.292) |
3/8″–1/2″ #3–4 Rebar |
|
| C6413 | YGL29C29 | #2 Str. (.292) — 250 kcmil (.575) | #2 Str. (.292) — 250 kcmil (.575) | #2 Str. (.292) — 250 kcmil (.575) |
||
| C6414 | YGL34C2 | 250 kcmil (.575) — 500 kcmil (.813) |
#6 Sol. — #2 Str. (.292) |
5/8″–3/4″ Rod | #6 Sol. — #2 Str. (.292) |
5/8″–3/4″ #5–6 Rebar |
| C6415 | YGL34C29 | #2 Str. (.292) — 250 kcmil (.575) | #2 Str. (.292) — 250 kcmil (.575) | |||
Preferred Lightning Protection Cable Cross
| #6 Sol. (.162) — #2 Str. (.292) | C61, C61T, C62, C62T, C63, C63T, C64, C64T, C65, C65T |
| #1 Str. (.332) — 250 kcmil (.575) | C50, C50T, C51, C52, C52T, C53, C54, C54T, C54-19, C55, C55T, C56, C56T, C56-19, C56-19T, C58-19, C58-19T, C59-19, C59-19T, C59-37, C59-37T |
| #2 Str. (.292) — 250 kcmil (.575) |
| Catalog Number | Installation Tools, Die Set Catalog Number (Number of Crimps) | |||
|---|---|---|---|---|
| Y750/Y35/Y39 HYPRESS™ | PAT750-18V | |||
| Element A | Element B | Element A | Element B | |
| YGL2C2 | U-0 1 | U-0 1 | U-0 1 | U-0 1 |
| YGL29C2 | U997 1, 3 | U-0 1 | U997P 1, 3 | U-0 1 |
| YGL29C29 | U997 1 | U997 1 | U997P 1, 3 | U997P 1 |
| YGL34C2* | PU998 1 | U-0 1 | PU998 1 | U-0 1 |
| YGL34C29* | PU998 1 | U997 1 | PU998 1 | U997P 1, 3 |
*These connectors can only be installed using the Y750, Y45, or Y46 HYPRESS™ with the recommended dies. These connectors CANNOT be installed with the Y35 and Y39 HYPRESS™.
1 Where a “U” or “PU” die is recommended with Y45 HYPRESS™, a PT6515 adapter must be used.
2 Where a “U” or “PU” die is recommended with the Y46 HYPRESS™, a PUADP-1 adapter must be used.
3 Polarized die for the PAT750-18V.