SPLICERS

STAMPED TEE SPLICER WITH COMPRESSION TYPE FINGERS TO CRIMP AROUND CABLE. MADE FROM 14 GAUGE COPPER OR 10 GAUGE ALUMINUM STOCK. FOR USE WITH ALL MAIN SIZE CONDUCTORS ON CLASS I STRUCTURES ONLY. UL LISTED

A301 ALUMINUM
C301 COPPER
C301L LEAD COATED COPPER

STAMPED STRAIGHT SPLICER WITH COMPRESSION TYPE FINGERS TO CRIMP AROUND ENDS OF CABLE FOR A STRAIGHT CONNECTION. MADE FROM 14 GAUGE COPPER OR 10 GAUGE ALUMINUM STOCK. FOR USE WITH ALL MAIN SIZE CONDUCTORS ON CLASS I STRUCTURES ONLY. UL LISTED

A303 ALUMINUM
C303 COPPER
C303L LEAD COATED COPPER

STAMPED PARALLEL SPLICER WITH COMPRESSION TYPE FINGERS TO CRIMP AROUND CABLE. MADE FROM 14 GAUGE COPPER OR 10 GAUGE ALUMINUM STOCK. FOR USE WITH ALL MAIN SIZE CONDUCTORS ON CLASS I STRUCTURES ONLY. UL LISTED

A305 ALUMINUM
C305 COPPER
C305L LEAD COATED COPPER

CAST PARALLEL CABLE SPLICER WITH ONE CARRIAGE BOLT AND 1-1/2" OF CONTACT ON CABLES OR WIRES. DESIGNED SO BOLT DOES NOT COME THROUGH BOTTOM OF SPLICER AND PENETRATE ROOF MEMBRANE. MAY BE USED WITH FULL SIZE CABLES AND SECONDARY BONDING WIRE. UL LISTED

A309 ALUMINUM
C309 BRONZE
C309L LEAD COATED BRONZE

CAST PARALLEL CABLE SPLICER WITH SINGLE BOLT TENSION AND 1-1/2" OF CONTACT ON CABLES AND WIRES. SPLICER MAY BE USED WITH FULL SIZE CABLES OR SECONDARY BONDING WIRE. UL LISTED

A310 ALUMINUM
C310 BRONZE
C310L LEAD COATED BRONZE

CAST PARALLEL CABLE SPLICER WITH DOUBLE CARRIAGE BOLT TENSION AND 2" OF CONTACT ON CABLE AND WIRES. SPLICER MAY BE USED WITH FULL SIZE CABLES OR SECONDARY BONDING WIRES. UL LISTED

A311 ALUMINUM
C311 BRONZE
C311L LEAD COATED BRONZE

CAST PARALLEL CABLE SPLICER WITH ONE CARRIAGE BOLT. SPLICER MAY BE USED WITH ROD, CABLE, OR BONDING WIRE WHERE LESS CONTACT IS ACCEPTABLE. UL LISTED

A312 ALUMINUM
C312 BRONZE
C312L LEAD COATED BRONZE

CAST STRAIGHT SPLICER HAS FOUR BOLT CABLE TENSION — TWO PER CABLE. SPLICER USED TO BUTT ENDS OF CABLE IN STRAIGHT LINE. UL LISTED

A313 ALUMINUM
C313 BRONZE
C313L LEAD COATED BRONZE

CAST PARALLEL CABLE SPLICER WITH DOUBLE BOLT TENSION AND 4" OF CONTACT ON CABLE OR WIRES. SPLICER MAY BE USED WITH FULL SIZE CABLES OR SECONDARY BONDING WIRES. UL LISTED

A314 ALUMINUM
C314 BRONZE
C314L LEAD COATED BRONZE

CAST PARALLEL CABLE SPLICER WITH DOUBLE BOLT TENSION AND 2" OF CONTACT ON CABLE OR WIRES. SPLICER MAY BE USED WITH FULL SIZE CABLES OR SECONDARY BONDING WIRES. UL LISTED

A315 ALUMINUM
C315 BRONZE
C315L LEAD COATED BRONZE

CAST PARALLEL CABLE SPLICER WITH DOUBLE BOLT TENSION AND 4" OF CONTACT ON CABLE OR WIRES. SPLICER MAY BE USED WITH FULL SIZE CABLES ONLY. UL LISTED

A316 ALUMINUM
C316 BRONZE
C316L LEAD COATED BRONZE

CAST TEE CABLE SPLICER HAS BOLT TENSION FOR CONNECTIONS WITH ALL MAIN SIZE CONDUCTORS. UL LISTED

A325 ALUMINUM
C325 BRONZE
C325L LEAD COATED BRONZE

CAST CROSS RUN CABLE SPLICER HAS 1-1/2" OF CONTACT WITH FOUR BOLT TENSION. FOR USE WITH ALL FULL SIZE CABLES. UL LISTED

A327 ALUMINUM
C327 BRONZE
C327L LEAD COATED BRONZE

---

BIMETALLIC SPLICERS

CAST BIMETALLIC CABLE SPLICER FOR MAKING CONNECTIONS BETWEEN ALUMINUM AND COPPER CABLES IN A STRAIGHT LINE. TWO-BOLT TENSION ON EACH CABLE FOR MAKING A STRONG CONNECTION. USE WITH ALL MAIN SIZE CONDUCTORS. UL LISTED

A320 ALUMINUM TO COPPER BIMETALLIC

CAST BIMETALLIC CABLE SPLICER FOR MAKING CONNECTIONS BETWEEN ALUMINUM AND COPPER CABLES. SINGLE BOLT TENSION CAPS ALLOW THE CABLES TO COME FROM A VARIETY OF DIRECTIONS. USE WITH ALL MAIN SIZE CONDUCTORS. ELIMINATES THE USE OF AN ADDITIONAL SPLICER. UL LISTED

A322 ALUMINUM TO COPPER BIMETALLIC

CAST CABLE DISCONNECTS USED FOR TESTING SYSTEM CONTINUITY OR GROUND RESISTANCE. SINGLE BOLT TENSION CAPS ALLOW FOR EASY DISCONNECTION.

A323 ALUMINUM TO ALUMINUM DISCONNECT
C323 COPPER TO COPPER DISCONNECT

---

BONDING CLAMPS, PLATES AND LUGS

CAST BONDING PLATE WITH 3 SQUARE INCHES OF CONTACT. BOLT TENSION CAP CAN BE TURNED SO CABLES CAN RUN HORIZONTAL OR VERTICAL. FOR USE WITH ALL FULL SIZE CABLES. UL LISTED

A404 ALUMINUM
C404 BRONZE
C404L LEAD COATED BRONZE

STAMPED BONDING PLATE WITH 8 SQUARE INCHES OF CONTACT. BOLT TENSION CAP PROVIDES MAXIMUM CABLE SUPPORT. FOR USE WITH ALL FULL SIZE CABLES. UL LISTED

A406 ALUMINUM
C406 COPPER
C406L LEAD COATED COPPER

STAMPED BONDING PLATE WITH 8 SQUARE INCHES OF CONTACT. COMPRESSION TYPE FINGERS CRIMP OVER CABLE FOR EASY INSTALLATION. AVAILABLE FOR CLASS I STRUCTURES ONLY. FOR USE WITH ALL FULL SIZE CABLES.

A407 ALUMINUM
C407 COPPER
C407L LEAD COATED COPPER

CAST BONDING PLATE WITH 8 SQUARE INCHES OF CONTACT SURFACE. HOLES PROVIDED FOR 1/4" BOLTS OR SMALLER SCREWS. BOLT TENSION CAP CAN BE TURNED SO CABLES CAN RUN ANY DIRECTION. FOR USE WITH ALL FULL SIZE CABLES. UL LISTED

A410 ALUMINUM
C410 BRONZE
C410L LEAD COATED BRONZE

CAST BONDING PLATE WITH 8 SQUARE INCHES OF CONTACT. BOLT TENSION CAP HAS 1- 1/2" OF CONTACT. FOR USE WITH ALL FULL SIZE CABLES. UL LISTED

A411 ALUMINUM
C411 BRONZE
C411L LEAD COATED BRONZE

CAST BONDING LUG WITH 3 SQUARE INCHES OF CONTACT SURFACE. AVAILABLE FOR BOLT SIZES 1/4", 3/8", 1/2", AND 5/8" DIAMETER. BOLT TENSION CAP CAN TURN SO CABLE CAN BE CONNECTED FROM ANY DIRECTION. FOR USE WITH ALL FULL SIZE CABLES. SPECIFY BOLT SIZE WHEN ORDERING. UL LISTED

A412 ALUMINUM
C412 BRONZE
C412L LEAD COATED BRONZE

CAST BONDING CLAMP HAS 8 SQUARE INCHES OF SURFACE CONTACT. C-TYPE CLAMP ALLOWS EASY INSTALLATION ON I -BEAMS OR OTHER FLAT AREAS. BOLT TENSION CAP HAS 1-1/2" OF CABLE CONTACT. FOR USE WITH ALL FULL SIZE CABLES. UL LISTED

A414 ALUMINUM
C414 BRONZE
C414L LEAD COATED BRONZE

CAST PIPE GROUNDING CLAMP WITH 1-1/2" OF CONTACT. AVAILABLE IN THREE PIPE SIZES. FOR USE WITH FULL SIZE CABLES. UL LISTED

PIPE RANGE .750" TO 1.315" O.D.

A416 ALUMINUM
C416 BRONZE
C416L LEAD COATED BRONZE

PIPE RANGE 1.750" TO 2.500" O.D.

A418 ALUMINUM
C418 BRONZE
C418L LEAD COATED BRONZE

PIPE RANGE 1.315" TO 1.900" O.D.

A417 ALUMINUM
C417 BRONZE
C417L LEAD COATED BRONZE

STAMPED GUTTER CLAMP WITH COMPRESSION FINGERS TO CRIMP OVER GUTTER EDGE AND CABLE. USE WITH ALL FULL SIZE CABLES. AVAILABLE FOR CLASS I STRUCTURES ONLY. UL LISTED

A420 ALUMINUM
C420 COPPER
C420L LEAD COATED COPPER

CAST U-BOLT PIPE CLAMPS. PROVIDES 1-1/2" OF CONTACT ON PIPE AND CABLE. USE WITH ALL FULL SIZE CONDUCTORS. FITS PIPE SIZES 1/2" TO 6-3/4". UL LISTED

1" U-BOLT FITS 1/2" TO 1- 1/4" O.D. PIPES

A421 ALUMINUM
C421 BRONZE
C421L LEAD COATED BRONZE

2" U-BOLT FITS UP TO 2" O.D. PIPES C424 BRONZE

A422 ALUMINUM
C422 BRONZE
C422L LEAD COATED BRONZE

3" U-BOLT FITS UP TO 3" O.D. PIPES A426 ALUMINUM

A423 ALUMINUM C426 BRONZE
C423 BRONZE C426L LEAD COATED BRONZE
C423L LEAD COATED BRONZE

4" U-BOLT FITS UP TO 4-1/2" O.D. PIPES

A424 ALUMINUM
C424 BRONZE
C424L LEAD COATED BRONZE

6" U-BOLT FITS UP TO 6-3/4" O.D. PIPES

A426 ALUMINUM
C426 BRONZE
C426L LEAD COATED BRONZE

CAST BOLT TENSION SECONDARY BONDING LUG FOR CONNECTIONS TO VTR'S, ROOF DRAINS, FLASHINGS, ETC. FOR USE WITH SECONDARY WIRE. UL LISTED

A430 ALUMINUM
C430 BRONZE
C430L LEAD COATED BRONZE

CAST TERMINAL BONDING LUG WITH 2 BOLT TENSION ON SECONDARY WIRES. LUG CAN BE SECURED WITH A SCREW, 1/4" DRIVE- IN ANCHOR, OR 1/4" BOLT. FOR USE WITH ALL SECONDARY WIRES. UL LISTED

A432 ALUMINUM
C432 BRONZE
C432L LEAD COATED BRONZE

CAST BOLT TENSION BONDING CLAMP SECURES TO I -BEAMS, PURLIN FLANGE, ETC. FOR USE WITH ALL FULL SIZE CABLES AND SECONDARY WIRES. FOR SECONDARY BOND ONLY. UL LISTED

A434 ALUMINUM
C434 BRONZE
C434L LEAD COATED BRONZE

EXTRA FLEXIBLE BONDING STRAP FOR USE IN MOVING OR VIBRATING METAL OBJECTS. 3/4" X 1/8" THICK. TWO SIZES STANDARD 10" AND 12". ANY SIZE CAN BE FABRICATED.

10" STRAP
A435 ALUMINUM
C435 TINNED COPPER

12" STRAP
A436 ALUMINUM
C436 TINNED COPPER

1-1/4" WIDE STRAP WITH A SECONDARY TERMINAL LUG (CATALOG NUMBER 432) ATTACHED. FITS ALL SECONDARY WIRES. ANY SIZE STRAP CAN BE FABRICATED. UL LISTED

A438 ALUMINUM STRAP FOR 2" PIPE
C438 TINNED COPPER STRAP FOR 2" PIPE

A439 ALUMINUM STRAP FOR 4" PIPE
C439 TINNED COPPER STRAP FOR 4" PIPE

1-1/4" WIDE STRAP WITH A PARALLEL CABLE CONNECTOR (CATALOG NUMBER 310) ATTACHED. FITS ALL MAIN SIZE CABLES AND SECONDARY WIRES. ANY SIZE STRAP CAN BE FABRICATED. UL LISTED

A442 ALUMINUM STRAP FOR 2" PIPE
C442 TINNED COPPER STRAP FOR 2" PIPE

A444 ALUMINUM STRAP FOR 4" PIPE
C444 TINNED COPPER STRAP FOR 4" PIPE

A446 ALUMINUM STRAP FOR 6" PIPE
C446 TINNED COPPER STRAP FOR 6" PIPE

A448 ALUMINUM STRAP FOR 8" PIPE
C448 TINNED COPPER STRAP FOR 8" PIPE

A450 ALUMINUM STRAP FOR 10" PIPE
C450 TINNED COPPER STRAP FOR 10" PIPE

NOTE: FOR LONGER STRAPS, PLEASE USE PART # C450-XX WITH THE "XX" STANDING FOR THE LENGTH OF THE STRAP. FOR EXAMPLE: FOR A 72" TINNED COPPER STRAP, THE PART NUMBER WOULD BE C450-72

2" WIDE STRAP WITH A PARALLEL CABLE CONNECTOR (CATALOG NUMBER 310) ATTACHED. FITS ALL MAIN SIZE CABLES. ANY SIZE STRAP CAN BE FABRICATED. UL LISTED

A452 ALUMINUM STRAP FOR 2" PIPE
C452 TINNED COPPER STRAP FOR 2" PIPE

A454 ALUMINUM STRAP FOR 4" PIPE
C454 TINNED COPPER STRAP FOR 4" PIPE

A456 ALUMINUM STRAP FOR 6" PIPE
C456 TINNED COPPER STRAP FOR 6" PIPE

A458 ALUMINUM STRAP FOR 8" PIPE
C458 TINNED COPPER STRAP FOR 8" PIPE

A460 ALUMINUM STRAP FOR 10" PIPE
C460 TINNED COPPER STRAP FOR 10" PIPE

NOTE: FOR LONGER STRAPS, PLEASE USE PART # C460-XX WITH THE "XX" STANDING FOR THE LENGTH OF THE STRAP. FOR EXAMPLE: FOR A 72" TINNED COPPER STRAP, THE PART NUMBER WOULD BE C460-72

 

 

PleaseContact Uswith any questions.